
( Brand: Phoenix Gold ), ( Manufacturer Part Number: TI1500.1 ), ( Part Type: Block Amplifier ), ( Rms Power: 1250 W ), ( Channels: Mono )
The Ti1500.1 Phoenix Monoblock Car Audio Amplifier is a masterpiece of audio engineering, designed to deliver unparalleled power and clarity to your automotive audio system. This monoblock amplifier, manufactured by Phoenix Gold, boasts an impressive 1500 watts RMS at 1 ohm, ensuring that even the most demanding subwoofers are driven with authority and precision.
The Ti1500.1 is equipped with a Class D topology, which combines the efficiency of digital amplification with the warmth and musicality of analog. This design results in a low-noise amplifier that delivers exceptional dynamic range and unrivaled sound quality. The amplifier's MOSFET power supply provides an ample current reserve, ensuring that it can deliver its full power output consistently, even under heavy load.
The Ti1500.1 features a user-friendly control panel, with adjustable parameters such as gain, bass boost, and phase control. These features allow you to fine-tune the amplifier to best suit the characteristics of your subwoofer and audio system. The amplifier also features a high-pass filter and a remote bass knob, providing flexible control over your bass response.
The amplifier's robust build quality is evident in its cast-aluminum chassis, which dissipates heat effectively and provides a solid foundation for the internal components. The Ti1500.1 is also equipped with a heavy-duty power supply and is protected by over-temperature, over-current, and short-circuit protection.
In conclusion, the Ti1500.1 Phoenix Monoblock Car Audio Amplifier is a powerful and versatile amplifier that delivers exceptional sound quality and reliability. Its impressive power output, advanced features, and robust build quality make it an excellent choice for any serious car audio enthusiast.
Pros of the Ti1500.1 Phoenix Mono Block Car Audio Amplifier:1. Powerful Output: With a maximum output of 1500 watts RMS at 1 ohm, this amplifier is capable of delivering high power to your subwoofer for a powerful and impactful sound.
2. Efficient Design: The Ti1500.1 uses a Class D topology, which is known for its efficiency and heat dissipation, allowing the amplifier to run cool and reduce the need for frequent cooling breaks.
3. High-Quality Components: The amplifier is built with high-quality components, including MOSFET power supply transistors and a large heat sink, ensuring reliable performance and longevity.
4. Versatile Inputs: The Ti1500.1 has a variety of inputs, including RCA and speaker-level inputs, making it easy to integrate with different audio sources and systems.
Cons of the Ti1500.1 Phoenix Mono Block Car Audio Amplifier:1. High Price Point: As a high-performance amplifier, the Ti1500.1 is not inexpensive. Its price may be out of reach for some budget-conscious consumers.
2. Large Size: The amplifier is quite large and heavy, which may make it difficult to install in some vehicles with limited space.
3. Limited Controls: While the amplifier has basic gain and crossover controls, it lacks more advanced features found in some higher-end amplifiers, such as remote bass control or parametric EQ.
Conclusion:The Ti1500.1 Phoenix Mono Block Car Audio Amplifier is a powerful and efficient amplifier that delivers high-quality sound and reliability. Its powerful output, efficient design, and high-quality components make it a great choice for serious audio enthusiasts who want to upgrade their car audio system. However, its high price point and large size may make it less appealing to budget-conscious consumers or those with limited installation space.
Recommendation:If you have the budget and the space, the Ti1500.1 Phoenix Mono Block Car Audio Amplifier is a great choice for those who want to take their car audio system to the next level. Its powerful output and efficient design make it a reliable and high-performance amplifier that will deliver a truly impressive sound experience. However, if you are on a tight budget or have limited installation space, there may be other options that are more affordable and practical for your needs.
Cosmetic conditions: tested good guaranteed it works great.
Switching to some very well recorded tracks from spies and other Sheffield lab recordings, the 500.
Optional features include a remote level control for up to 20db of adjustment, and monitoring display, keep track the amplifiers operational condition. While this noise is well above any audible frequencies, typically 50-80khz it measured by test equipment, and easily seen on an oscilloscope.
The amplifier uses a 30-300hz, 24db Oct low pass filter, and there is also subsonic filter that can be set from 10-55hz, perfect for vented enclosure applications. Power output was prodigious and seemed quite effortless. 1 is also a powerhouse. The extruded aluminum heat sink is finished in a brushed black anodized treatment with classy looking Plexiglas trim panel, die-cast end caps built venting.
Even at high volume levels, I never had a sense of reaching the amps limits or making it really work hard. Other than that, it was a gem. But, fear not, because this noise is well above the audible spectrum, and most certainly higher than any sub woofer could ever reproduce, for daily use its simply not a problem.
One of the products lines offered by new Phoenix Gold is ti series amplifiers. I listened to it for a couple of hours and even though was giving my woofers quite workout, the amplifier barely got more than warm touch.
A table in the owners manual indicates amount of needed for any desired adjustment, which takes guesswork out tuning. The heat sink design allows heat to be dissipated over its entire area, maximize cooling.
And don't think for a minute the new owners of brand are only paying lip service to those legacy products. If you want to return a item need contact me before it. 1 is a very good performing amplifier, and makes gobs of power. After all my listening, the only thing I could find to gripe about was a very slight thump when turned off.
Connections and controls are first class too, the power terminals will accept 1 gauge cables, speaker can handle 12 wire. When I was poking around inside the 500. I did find the grayish-silver silk screening a bit tough to read, and perhaps pure white would have been better choice for readability, but at expense of aesthetics.
Amplifier is fully functioning and bench tested.
Performance bench measurements regular readers will recall a very common problem technicians have when measuring the power of many class amplifiers. The over and under voltage protection worked perfectly, so did short circuit when I shorted outputs at 500 watts of power. Then I hooked the up in my reference system, and connected it to a sealed woofer system composed of pair high quality 4 ohm woofers, wired parallel for 2 load. Three blue leds flushed into the top of heat sink tell you is turned on and in plexus trim panel warn peak output levels protection issues.
Thanks and happy buying study the pictures because its item you are going to receive. As pictured. Shipping: free shipping.
Just like the old m series of, performance is strong, and fit finish excellent. Guaranteed to work. Over the following decade or so, Phoenix Gold established an excellent reputation based on quality and performance of its products, as well exclusive limited-edition car amplifiers.
1 was a serious performer. Item has been marked. The size of chassis is quite appropriate however, because 500.
With that said, the 500. I selected a crossover setting of 100hz, and left the subsonic filter at 10hz, bass boost off. Bass output was well controlled and articulated, always provided a sense of authority.
1, I found a little that reads love the smell of burnt voice coils in morning.
As a result, I chose not to use the usual 1 is trappable to a second one, for 2500 watts .
0 Thad limit, instead selecting the point at which amplifier begins to clip, is a more realistic real world indication of power limits in normal application.
I put the 500. And, if you do the math, ll realize there is less than 2db of difference between 800 watts and 1250.
Conclusion if the 500. 1 proved it could reproduce the detail and articulation captured in live to two track recordings. Bass boost is available as well with maximum reaching 18db at 45hz. Features the Phoenix Gold 500.
That is, until you attempt to measure power using a standard distortion noise specification as limit. 1 is any indication, the Phoenix Gold brand ready for a rebirth and doing legacy of 20 years ago proud. All of the connections and controls are laid out along one long edge amplifier easy to adjust.
Rated at 1250 watts into 1 ohm, and priced around 750 bucks us, the class amplifier looks classy well made. 1, the amplifier had quite a bit of this high frequency noise on its outputs, which did show up in my measurements.
In 1990, the brand expanded to include amplifiers and speakers. The ti series amplifiers are manufactured in Korea, and come with a one, two, or three-year warranty.
Listening after I unpacked the 500. 1 is a rather large amplifier, measuring about long, almost wide, and In the case of 500.
1 sub woofer amplifier. RCA's are nickel plated panel mounts, and the control pots smooth finely detentes for accuracy in adjustment. Phoenix Gold 500.
Designed with the brands heritage in mind, and striking new cosmetics, I had chance to take a close look at 500. This item is in good working and cosmetic condition. The controls and filters worked precisely as advertised, because of excellent efficiency in design, even after repeated power tests at high current levels, amplifier did not overheat.
The effect reminds me of an expensive piece home audio gear.
Amp is in great shape, signs of wear and marks scratches. 1 and took it out of the very nice soft zippered bag came in, I flipped through owners manual to make sure understood what was.