ALPINE MRD-M1001 Monotested V12 500W

( Brand: Alpine ), ( Model: MRD-M1001 ), ( Rms Power: 1000w )

Review ALPINE V12 Class Monotested Works

The MRD-M1001 Alpine V12 is a powerful and high-quality mono subwoofer that is sure to enhance your audio experience. This subwoofer boasts a 12-inch woofer cone made of durable materials, ensuring longevity and excellent sound quality. The cone is surrounded by a high-roll rubber surround, which provides flexibility and prevents damage from excessive movement.

The MRD-M1001 Alpine V12 features a 500-watt RMS (Root Mean Square) power handling capacity, which means it can consistently deliver high-quality, powerful bass without distortion. The subwoofer is also mono-tested, meaning it delivers sound in a single channel, focusing all its power on producing deep, rich bass tones.

This subwoofer comes with a built-in 24dB/octave low-pass crossover, which allows you to fine-tune the bass frequency to best suit your audio system. The MRD-M1001 Alpine V12 also features a phase switch, which allows you to adjust the phase of the subwoofer to match your main speakers, ensuring optimal sound quality.

The MRD-M1001 Alpine V12 is built with a sturdy MDF (Medium Density Fiberboard) enclosure, which provides excellent sound insulation and reduces vibration. The enclosure is also vented, which helps to reduce internal pressure and prevent distortion.

The MRD-M1001 Alpine V12 is a versatile subwoofer that can be easily installed in a variety of vehicles, thanks to its mounting depth of 7.9 inches and weight of 44.5 pounds. The subwoofer also comes with a high-level input and low-level input, allowing you to connect it to both high-level and low-level audio sources.

Overall, the MRD-M1001 Alpine V12 is a powerful and high-quality subwoofer that is sure to deliver deep, rich bass tones that will enhance your audio experience. With its durable materials, built-in crossover and phase switch, and sturdy enclosure, this subwoofer is a great investment for anyone looking to upgrade their audio system.

1. Powerful: With a 500W output, this subwoofer can deliver deep and powerful bass.

2. Monotested: The subwoofer is Monotested, which means it was tested with a single amplifier channel to ensure accurate performance.

3. High-quality materials: The MRD-M1001 Alpine V12 uses high-quality materials such as aluminum cones and dust caps to ensure durability and performance.

4. Versatile: The subwoofer can be used in various vehicles and is compatible with most car audio systems.

1. Size: The 12-inch subwoofer is quite large and may not fit in all vehicles, especially smaller ones.

2. Price: The MRD-M1001 Alpine V12 is a high-end subwoofer and may be expensive for some budgets.

3. Installation: Installation of the subwoofer may require professional help, which will add to the overall cost.

The MRD-M1001 Alpine V12 500W Monotested is a powerful and high-quality subwoofer that can deliver deep and powerful bass. However, its large size and high price may make it unsuitable for some car owners. If you have the budget and the space, the MRD-M1001 Alpine V12 is a great choice for those looking for a high-performance subwoofer. If you're on a tight budget or have limited space, you may want to consider a smaller and less expensive subwoofer.

If you're looking for a high-performance subwoofer and have the budget and space, the MRD-M1001 Alpine V12 is a great choice. It delivers powerful and accurate bass, and its high-quality materials ensure durability and long-term performance. However, if you're on a tight budget or have limited space, you may want to consider a smaller and less expensive subwoofer that can still deliver good bass performance. Ultimately, the best subwoofer for you will depend on your specific needs and budget.

Details:

After making adjustments, the output disable mode should be turned off. For multiple amplifiers, the roux-4280 remote amplifier control should be used. This should be used when adjusting the DPs function.

Output disable mode: the mode turns off power of while leaving control functions active. Gain factor: factor is a unique and patent-pending digital processing technology that allows more audible power to be delivered even when pushing the amplifier its limit. Optional remote level control: this amplifiers can be controlled remotely with the roux-4180 sub woofer control. Built-in variable crossover: the low-pass crossover is adjustable from 30 to 200hz in 1 12 octave steps with a delectable slope of 12db or 24db.

This is useful for eliminating the loud thump that occurs when multiple amplifiers are turned on simultaneously. Note: technically this is true of any amp, but with analog adjustments an oscilloscope needed to ensure the outputs are identical. You can select a gain factor of 0db, 6db or 9db. Rms power rating measured at 14.

When engaged, the bass compensation circuit provides with sharp auditory impact, even a small diameter woofer. The eq level is adjustable from 12db to 12db in 1db steps. Guts pictured. Two Allen-head screws supplied secure the hood in closed position.

When the amplifier goes into protection mode, LCD display will show a error code explaining cause of failure controller: has 7-pin female din jack for connection to roux-4280 remote control rack or roux-4180 sub woofer level. The control panel consists of six buttons: display, mode up, down enter. This thing is beast, featuring a cool electronic display and controls. Phase control: the is delectable between and 180 degrees.

The result is more clean power, sooner on volume knob. Note: the roux-4180 can only control one amplifier. Input level switch: to give you a wider range match the head unit output, MRD-M1001 features two-way switch. The terminal cover hides power, signal and speaker wires, secures to amplifier via two Allen-head screws supplied.

5, 1, 2, 3, 4, and 5. Works perfectly, just the cosmetics are a bit rough. This amplifiers true digital design keeps the signal purer and makes extremely efficient.

Unlike all analog compensation techniques, gain factor interpolates and modifies the signal at individual digital data level, enhancing smaller signals more larger less without driving amplifier into hard clipping. By pressing the display button, you can cycle through following readouts: voltage supply, current draw internal temperature Fahrenheit and Celsius. The crossover point is variable between 15hz and 50hz in 5hz steps, can be switched on or off. These buttons are used to navigate the menu that includes all adjustments on input level, crossover, eq, time correction, phase, etc.

For this reason, each needs its own id when more than one and the rack are used. Display control: the MRD-M1001 features a 5-digit information that allows you to check operational status of amplifier. The adjustment range runs from 0-10ms in. volts , or a range of.

This is particularly useful to maximize spl if there are multiple subs and sub amps. Bass engine DPs: the MRD-M1001 uses digital signal processing to offer several sophisticated controls without loss or sound degradation. 0v: into a 4-ohm load: 350 watts x 1 into 2-ohm 700 1.

The frequency is adjustable from 30 to 160hz in 1 12 octave steps. This is pulled from crutch field:v12 accruals-d mono amplifier: the v12 amplifier design allows it to deliver massive power without correspondingly huge current draw.

Its missing the bottom cover and one of hinges is. Amplifier id: Alpines roux-4280 remote control rack will up to eight v12 accruals-d amplifiers. You can choose between a range of. Turn on delay: the amps turn-on time is adjustable from to 2 seconds in.

Selling my Alpine v12 MRD-M1001 amplifier. Digital parametric equalizer: a fully adjustable eq is built into this amp. Hood: the amplifier has a hinged brushed aluminum hood that flips up to reveal control panel and LCD display. Multi-amp installation: because the above bass engine adjustments are all digital and discrete, two of these amplifiers can be used to power voice coils a DC woofer.

4v: into a 4-ohm load: 500 watts x 1 into 2-ohm 1000 1rms power rating measured at 12. The bass engine features include:digital time correction: correction allows you to this with others in system. Verification certificate: the amplifier comes with a certificate that informs you of total rms output particular. Pushes 500W rms at 4 ohms, and 1000w 2 ohms.

3-way protection circuitry: this amplifier has a circuitry to guard against accidents and undesired operations. Only the power of DPs circuit is on and in current saving state. Subsonic filter: the filter is used to out low frequencies that you cannot hear but can rob power from amplifier. It lists the model number, serial test date, and conditions voltage , impedance.

2 second steps. When closed, the LCD display is visible through smoked plastic window. It includes protection for short circuit, over- voltage , and thermal overload. Terminal cover: the amplifier is equipped with a silver brushed aluminum cover that can be attached to front panel improve appearance after has been installed.

part #: mrdm1001 prices

• $70.00-$109.00

specifications caramplifieca:

• brand: Alpine
• model: Mrd-m1001
• rms power: 1000w

Offer caramplifieca:

• bids: 0
• best offer: true
• Sold: 0
• quantity: 1
• Started: February 4, 2018, 10:43 pm

Payments caramplifieca:

• PayPal

General caramplifieca:

• consumer electronics > vehicle electronicsgps > car audio consumer electronics > car amplifiers car audio
• in stock: Yes
• condition: Used

Returns caramplifieca:

• policy: no returns

Seller caramplifieca:

• zipcode: 98052
• city: Redmond, Washington

Shipping caramplifieca:

• handling: 2 days
• type: Flat
• cost: $32.0

Ratings:

1. ULTRA QUICK PAYMENT WITH PAYPAL! A 01-31-18
2. Excellent 01-25-18
3. Shipped ok! 02-03-18
4. Made it even easier than expected and a super fast transaction. Good guy. 01-24-18
5. Aaa 01-22-18

Alpine MRD-M1001 Is Similar To:

• 3558 Alpine Class Channel Sound Quality Amplifier (32.5% similar) Most people don't even know that Alpine ever made a true class car audio amplifier that's how rare this particular model is. Its impossible to describe how good it sounds, you just have experience for yourself and then you'll understand. This amplifier sounds like god made it for himself. Anything I...(November 11th, 2018)
• 4958043544301 Alpine Car Audio Bridgeable Class Amp Amplifier Max (37.5% similar) High pass and low filters these two let you set the frequency points for high, mid bass ranges to match your speakers ensure optimum efficiency. 4 v dc 11 to 16 input sensitivity. V frequency response: 5 Hz - 50 khz 0,-3 db speaker impedance: 4 or 2 signal to noise:s n ratio UHF a weighted, ...(March 14th, 2019)
• 1-channel Mrd-m605 Alpine Car Amp (50% similar) Used Alpine mrd M605 amplifier that works great has light scuff marks but doesn't affect the performance at all...(August 9th, 2016)
• 4-channel Mrx-f35 Mrx-m55 Alpine Car Audio Amplifier 340watts Class D X-power Series (36.5% similar) Still in the factory wrapping comes with all brand new hardware and manual. Thesis brand new I have had it for about a year and never used it...(January 11th, 2016)
• 4-channel Pdx-f6 Alpine New Class-d Digital Car Amplifier Amp 600w Rms Pdxf6 (29.9% similar) 5 car sub woofers 8 car sub woofers 10 car sub woofers 12 car sub woofers 13. Bridged, 4 ohms 300 watts x 2 Chan. Total rms output 600 watts dc dc wpm power supply with star circuitry blue led power status indicator conveniently located on the top discrete presage 6 layer glass epoxy PC board ...(March 30th, 2016)
• Mrd-f75 Alpine (48.9% similar) ...(February 22nd, 2016)
• Mrd-m1005 Alpine V12 1000w Mono Block Amp (69.4% similar) Works great does have few chips in paint and scratches but please remember it is used...(June 26th, 2016)
• Mrp-f257 Flex Alpine 5 Channel Amplifier 1 Sub Car Amp-works Great (33% similar) Alpine msrp F257 5 channel car audio amplifier power output rms continuous power at 14. No other accessories, or packaging, amplifier only. 3 Thad bridged into 4 ohms 70W mono sub woofer 80W 4 ohms sub woofer, 20 to 200 Hz frequency response 10 Hz to 50 khz 0, 1 db signal to noise ratio 100 db ...(January 4th, 2016)
• Mrp-m850 Alpine 850 Rms Monoblock Car Amp Works Great Guaranteed (40% similar) Rms according to my tests 570 rms 4 ohms ohms ohm not recommended but was in fact stable. Selling a used Alpine msrp M850, the works great and outs out plenty of power based...(April 14th, 2016)
• V M350 Mrp Sub Alpine 700w Power Prices Class (51.9% similar) This is a used in good working condition Alpine class digital 700WATT v power mono sub amplifier...(May 15th, 2015)
• Mrd-605 Alpine Subwoofer Amp Watts Rms Ohms Old School (42.4% similar) Works perfectly. Its a beast. Nice Alpine mono bloc 600 watts 2 ohms. No offers wanted...(July 3rd, 2018)