TARAMPS Amplifier Watts MD-8000-1 7898556844468 MD8000.1 1-OHM

( Brand: Taramps ), ( Manufacturer Part Number: 8000 ), ( Model: MD 8000 1 OHMS ), ( Part Type: Amplifier ), ( Country/region Of Manufacture: Brazil ), ( Rms Power: 8000w 1ohms ), ( Channels: Mono ), ( UPC: 898556844468 )

Review TARAMPS Amplifier 1-ohm 8000 Watts Rms Used Warranty Free Shipping

Taramps MD8000.1 Monoblock Amplifier - Unleashing an Astounding 8000 Watts at 1-Ohm

Embark on an unparalleled audio journey with the Taramps MD8000.1 Monoblock Amplifier. This powerhouse of sound is designed to cater to the most demanding audiophiles, delivering a staggering 8000 watts of pure, unadulterated power at a 1-ohm load.

The MD8000.1, a testament to Taramps' commitment to quality and performance, is a masterpiece of engineering that pushes the boundaries of what's possible in a monoblock amplifier. Its sleek, compact design, with dimensions of 17.5 x 13.5 x 7.5 inches, belies the colossal power it houses within.

Under the hood, you'll find a state-of-the-art Class D topology, ensuring maximum efficiency and minimal heat dissipation. This, coupled with its high-current MOSFET power supply, guarantees a clean, distortion-free sound even at the highest volume levels. The MD8000.1 also boasts an innovative thermal management system, ensuring optimal performance even under heavy, prolonged use.

The amplifier features a user-friendly control panel, with easily accessible controls for gain, crossover, and phase. It also sports a top-mounted, high-resolution display that provides real-time data on various parameters, such as output power, temperature, and protection status.

Safety is never compromised with the MD8000.1. It comes equipped with a host of protective features, including over-current protection, over-voltage protection, and short-circuit protection. In the rare event of a fault, the amplifier will automatically shut down to prevent damage to the unit or connected speakers.

Whether you're a car audio enthusiast looking to take your system to the next level, or a live sound engineer seeking the ultimate in power and versatility, the Taramps MD8000.1 Monoblock Amplifier is the perfect choice. With its jaw-dropping power output, cutting-edge technology, and robust build quality, this amplifier is sure to elevate your audio experience to new heights. Experience the future of audio today with Taramps MD8000.1.

Analysis of Taramps MD8000.1 Amplifier (1-ohm, 8000 watts)

1. High Power Output: With a maximum power output of 8000 watts, this amplifier is capable of delivering powerful audio in car audio systems.

2. 1-Ohm Stable: The 1-ohm stable design ensures that it can be connected directly to a 1-ohm load without the need for external resistors.

3. Bridged Mode: The bridged mode allows the amplifier to produce double the power, making it suitable for systems that require high-power output.

4. Efficient Heat Sink: The large heat sink design helps in dissipating heat generated during operation, ensuring the amplifier's longevity.

1. Size and Weight: Given its high power output, the amplifier is quite large and heavy, which may pose installation challenges.

2. Power Consumption: High power amplifiers consume a significant amount of power, which can lead to increased energy bills.

3. Cost: The MD8000.1 is a high-end amplifier and comes with a premium price tag, which might be prohibitive for some buyers.

4. Complex Setup: Due to its advanced features, setting up this amplifier might require some knowledge and expertise in car audio systems.

The Taramps MD8000.1 is a high-performance amplifier designed for those who demand powerful audio in their cars. Its 1-ohm stable design, bridged mode, and efficient heat sink make it an attractive choice. However, its size, weight, power consumption, cost, and complex setup are factors to consider before making a purchase.

If you are looking for a powerful amplifier for your car audio system and are willing to invest in it, the Taramps MD8000.1 could be a good choice. However, if you are a beginner or looking for a more budget-friendly option, you might want to consider amplifiers with lower power output and simpler setup. Always ensure that you have the necessary knowledge and expertise, or seek professional help, before installing high-power car audio equipment.

Details:

The lowest voltage required for maximum results with the amplifier,.e. Power 12.6v 1 ohm: 8000w rms. Number of channels: 01. Technical specifications: Operating class: class.

The common use of this function is to reduce the presence bass in door speakers, for example. Bass boost is the bass for amplifiers sub channel, that is, an extra. This is the estimated consumption of amplifier working at minimum impedance playing music maximum volume. This is the reference for amplifiers consumption on and without music.

LPG or low pass filter English term means filter, that is, it allows everything below this reference to be reproduced and anything above indication will not used. Bass boost: freq. Protection system: short circuit at the output, output in relation to GND, low impedance protection, high/low voltage protection and thermal. Hspf or high pass filter English term, means filter, that is, it allows everything above this reference to be reproduced.

This is the designation of an amplifier, class also called digital due to wpm pulse width modulation used in its operation, allowing for a small, efficient amplifier with reduced heating compared other construction classes. This protection may also occur due to voltage s outside the operating range, or even thermal that occurs conditions in which amplifier has above-normal heating. SHIPPING UPS GROUND, TARAMPS MD8000.1 AMPLIFIER USED WORKS 100% COMES WITH 30 DAY WARRANTY. Outside this specification, it will not turn on or activate a protection.

A common use of this function is to reduce the presence voice in sub woofers. Reference for bench/laboratory tests under specific conditions with restive load, fixed frequency and power supply stable. Return Exchange. This is the indication of amplifiers operating conditions where it will have minimum and maximum voltage for its operation.

Shipping Information. The power with a voltage of 12.6v volts is related to the operation vehicle/power supply.

part #: md80001 prices

• $402.99-$489.00

specifications caramplifieca:

• brand: Taramps
• mpn: 8000
• model: Md 8000 1 Ohms
• part type: Amplifier
• country/region of manufacture: Brazil
• rms power: 8000w 1ohms
• channels: Mono
• upc: 898556844468

seller caramplifieca:

• rating: 98.9%
• city: Monticello, Indiana
• # reviews: 498

general caramplifieca:

• Vehicle Electronics GPS > Car Audio > Car Amplifiers
• condition: Used

shipping caramplifieca:

• transit: 2-5 Days
• carrier: UPS
• class: Standard
• service: UPS Ground
• type: Fixed
• cost: $0.00

returns caramplifieca:

• method: Money back
• policy: Returns Accepted
• paid by: Buyer
• time: 60 Days

payments caramplifieca:

• wallet: Paypal
• credit card: Diners-club
• other

offer caramplifieca:

• sold: 0
• options: Ship-to-home
• availability: In Stock
• started: June 26, 2025
• quantity: 1

Taramps MD-8000-1 Is Similar To:

• 16632 Taramps Ds Ohms Channels Watts Amplifier Taramp 7898556844369 (31% similar) Part: 7898556844369 prices...(December 3rd, 2018)
• Ohm Hd Dealer Taramp 1 3000 Full Authorized Prices Range Amplifier Taramps Usa (34.5% similar) Small amp, big power it has served me great. I have never had any problems with it...(April 28th, 2015)
• 4dnqriepwp Taramps Ts Ohms Channel Watts Class Full Range Amplifier New (26.4% similar) 8 CDC - 4 ohms 400W rms 2 x 200W bull input sensitivity: 200MV vol max signal to noise ratio: 90DB frequency response: full range: 18HZ 30KHZ 1DB high pass crossover hspf 90HZ 12DB 8TH low LPG impedance: 22K thermal protection system and short output minimum supply voltage : maximum 16 standby ...(March 19th, 2019)
• 900816 Taramps Md Ohms Watts Class Full Range Mono 7898556844499 (23.7% similar) ...(February 15th, 2019)
• Hd8000compac1442 Taramps 8000w Car Amplifier (33.3% similar) 594162TARASD85. The offered shipping cost in the listing applies only to 48 states. Please for details. Taramp's HD8000COMPAC1442, 8000W car amplifier new with a scratch or dent notes shows signs of handling some stains on out steel shell plastic side protector coming away from metal shell this item...(November 9th, 2016)
• B01e5to8i6 Taramps Md Ohms Amplifier Car Amp Taramp (37.4% similar) 78 DBMS total harmonic distortion Thad. Maximum consumption em se AL sine 1KHZ the HD amplifier is a high performance product, innovative design and edges front back in abs, which provide more security at installation time. This products ranging from watts of power, applied in several areas aimed ...(November 29th, 2018)
• Bass12001ohm Taramps Channel Bass Only Car Audio Amplfier Boost Ohm Taramp (34.6% similar) Crossover high pass hspf: var Vela, 8 a 30HZ 12DB efficiency: number of channels: 01. Bass boost: parametric, 35 a 60HZ, 12DB. Signal noise ratio: 90DB. Input sensitivity: 320MV - level 100. Amplifier CLASS1200 watts rms grab it while lasts. Taramps BASS12001OHM 1 channel bass only car audio ...(August 15th, 2018)
• Bass12k Taramp Taramps Power Competition Amp Amplifier For Car (32% similar) Condition is new. Taramps BASS12K BASS12000 ultra-high power competition amplifier for car...(July 7th, 2018)
• Bass15000 Taramps Rms Channel Ohm Amp 7898556840279 (24.5% similar) After 12 noon, ships on the next working day...(December 20th, 2018)
• Ds 440x4 Taramps Class Ohm Stable (23.1% similar) 52 ounces product dimensions: WATS x 4 at 2 ohm. Taramps 4CH CLASS110WTS x 4/2 ohm stable DS440X4 item weight...(October 3rd, 2018)
• Ds-800x4 Taramps Ohm Watts Rms Class Power Amplifier (38.6% similar) Number of channels - pt 04MAX...(October 27th, 2018)